MicroMapper
User’s Manual
2
Features
• Tests for wiring faults and detects opens, shorts,
crossed, reversed, and split pairs. (Split pair fault
detection requires a minimum cable length of
15.75" (40cm))
• Verifies shield integrity
• M
ICROMAPPER’s Remote Identifier enables one
person to test installed cabling
• Easy to read fault display and high speed testing
• Generation of two tones for tracing cables and
locating hidden cables
• Debug-mode for detailed fault identification
results
• Auto-sleep mode to decrease power consumption
MICROMAPPER Kit Content
Your MICROMAPPER kit contains the following:
• 1 M
ICROMAPPER network cable tester
• 1 M
ICROMAPPER remote
• Patch cord
• Quick Reference Guide
• Product Manuals CD
Registration
Registering your product with Fluke Networks gives
you access to valuable information on product updates,
troubleshooting tips, and other support services.
To register, fill out the online registration form on the
Fluke Networks website at
www.flukenetworks.com/registration. If you do not
have Internet access, print the registration form from
the CD included with the product. Fill out the form,
then mail or fax it to the appropriate address for your
country.
To Next Page
Loading...
Need help?
General
