789/787B
Users Manual
10
Table 4. Rotary Function Switch Positions for Measurements (cont.)
No. Position Function(s) Pushbutton Actions
T
Default:
Measure dc V
h
Frequency
counter
Same as above
U
Default:
Measure dc mV
h
Frequency counter
Same as above (mV has only one range)
V
Default: Measure Ω
G for continuity
J (Blue) D test
Same as above (diode test has only one range)
W
High test lead in cA: Measure
A dc
J (Blue) selects ac
High test lead in dmA:
Measure mA dc
Same as above (only one range for each input jack position,
30 mA or 1 A)
To Next Page
Loading...
