Characteristics
2.6 Service and Maintenance
2
2-11
2.6 Service and Maintenance
Calibration Interval 1 Year
2.7 Safety
Designed for measurements on 600 Vrms Category III Installations, Pollution Degree 2,
per:
• ANSI/ISA S82.01-1994
• EN61010-1 (1993) (IEC1010-1)
• CAN/CSA-C22.2 No.1010.1-92 (including approval)
• UL3111-1 (including approval)
Max. Input Voltage Input A and B
Direct on input or with leads 600 Vrms. For derating see Figure 2-1.
With Banana-to-BNC Adapter BB120 300V rms. For derating see Figure 2-1.
Max. Floating Voltage
from any terminal to ground 600 Vrms up to 400Hz
ST8112.CGM
Figure 2-1. Maximum Input Voltage vs Frequency
To Next Page
Loading...
