Fluke Ti100 - Spot Temperatures

Ti100, Ti110, Ti125, TiR110, TiR125
Users Manual
22
7. Push:
• U to set the change and go back to the live view.
• V or X to set the change and go back to the previous menu.
• W to cancel the change and go back to the live view.
Note
If Display Information is set to Display All, you see the information
about current transmission correction as
τ = xx.
Spot Temperatures
The Spot Temperatures are floating HI and LO temperature indicators that
move on the display as the temperature measurements of the image fluctuate.
To turn on/off the hot and cold spot indicators:
1. Push V.
2. Push R/S to highlight Measurement.
3. Push U or Y to view the menu.
4. Push R/S to highlight Spot Temp.
5. Push U or Y to view the menu.
6. Push R/S to toggle this function ON or OFF.
7. Push:
• U to set the change and go back to the live view.
• V or X to set the change and go back to the previous menu.
• W to cancel the change and go back to the live view.
Note
If the Display is set to Display All, you see the information about
current transmission correction as τ = xxx%.