Fluke Ti100 - Date, Time, and Language Settings

Thermal Imagers
Menus
39
4. Push R/S to highlight Auto Off.
5. Push U or Y to view the menu.
6. Push R/S to highlight an option.
7. Push U to set the option.
8. Push:
• U to go back to the live view.
• V or X to set the change and go back to the previous menu.
• W to cancel the change and go back to the live view.
Date
The date can be displayed in one of two formats: MM/DD/YY or DD/MM/YY.
To set the date:
1. Push V.
2. Push R/S to highlight Settings.
3. Push U or Y to view the menu.
4. Push R/S to highlight Date.
5. Push R/S to highlight date format.
6. Push U or Y to view the menu
7. Push U to set the date format.
8. Push R or S to change the setting.
9. Push Y to move to the next setting.
10. Push R or S to change the setting.
11. Push Y to move to the next setting.
12. Push R or S to change the setting.
13. Push:
• U to set the change and go back to the live view.
• V or X to set the change and go back to the previous menu.
•
W to cancel the change and go back to the live view.