Fluke Ti100 - Backlight

Thermal Imagers
Menus
35
3. Push U or Y to view the menu.
4. Push R/S to highlight Laser/Torch.
5. Push U or Y to view the menu.
6. Push R/S to highlight an option.
7. Push U to set the option.
8. Push:
• U to set the change and go back to the live view.
• V or X to set the change and go back to the previous menu.
• W to cancel the change and go back to the live view.
Backlight
The backlight level control is set to low, medium, and high. To set the
backlight:
1. Push V.
2. Push R/S to highlight Camera.
3. Push U or Y to view the menu.
4. Push R/S to highlight Backlight.
5. Push U or Y to view the menu.
6. Push R/S to highlight an option.
7. Push:
• U to set the change and go back to the live view.
• V or X to set the change and go back to the previous menu.
• W to cancel the change and go back to the live view.