Fluke Ti100 - Outside;Inside Alarm; Display Graphics Presentation

Ti100, Ti110, Ti125, TiR110, TiR125
Users Manual
30
Outside/Inside Alarm
If you set values for the high-temperature color alarm and a low-temperature
color alarm, the Imager will have the options for inside or outside isotherm
color alarms.
To set an outside/inside isotherm color alarm:
1. From the Color Alarm menu, push R/S to highlight Outside
or Inside.
2. Push:
• U to set the change and go back to the live view.
• V or X to set the change and go back to the previous menu.
• W to cancel the change and go back to the live view.
Display Graphics Presentation
The options for how you view the on-screen graphics are in the Display menu.
These options are Display All, Details and Scale, Scale Only, and Image Only.
To set the display:
1. Push V.
2. Push R/S to highlight Measurement.
3. Push U or Y to view the menu.
4. Push R/S to highlight Image.
5. Push U or Y to view the menu.
6. Push R/S to highlight Display.
7. Push U or Y to view the menu.
8. Push R/S to highlight an option.
9. Push:
• U to set the change and go back to the live view.
• V or X to set the change and go back to the previous menu.
• W to cancel the change and go back to the live view.