Fluke Ti100 - Set High-Temperature Color Alarm; Set Low-Temperature;Dew Point Color Alarm

Thermal Imagers
Menus
29
To view the Color Alarm menu:
1. Push V.
2. Push R/S to highlight Image.
3. Push U or Y to view the menu.
4. Push R/S to highlight Color Alarm.
5. Push U or Y to view the menu.
Set High-Temperature Color Alarm
To set a high-temperature color alarm:
1. From the Color Alarm menu, push R/S to highlight the option:
Set High Alarm.
2. Push Y to open the Color Alarm menu.
3. Push R/S to adjust the temperature setting.
4. Push:
• U to set the change and go back to the live view.
• V or X to set change and go back to the previous menu.
• W to cancel the change and go back to the live view
Set Low-Temperature/Dew Point Color Alarm
To set a low-temperature/dew point color alarm:
1. From the Color Alarm menu, push R/S to highlight Set Low
Alarm.
2. Push Y to open the Color Alarm menu.
3. Push R/S to adjust the temperature setting.
4. Push:
• U to set the change and go back to the live view.
• V or X to set the change and go back to the previous menu.
• W to cancel the change and go back to the live view.