Fluke Ti100 - Imager Information and Maintenance

Thermal Imagers
Menus
41
Language
To change the display to a different language:
1. Push V.
2. Push R/S to highlight Settings.
3. Push U or Y to view the menu.
4. Push R/S to highlight Language.
5. Push U or Y to view the menu.
6. Push R or S to change the setting.
7. Push U to set a new language.
8. Push:
• U to set the change and go back to the live view.
• V or X to set the change and go back to the previous menu.
• W to cancel the change and go back to the live view.
Imager Information
You can access information about the Imager from the Settings Menu. This
includes:
• Model
• Camera serial number
• Refresh rate
• Engine serial number
• Firmware version
• FPGA #
• Factory calibration date
• Production date
To display the Imager Info:
1. Push V.
2. Push R/S to highlight Settings.
3. Push U or Y to view the menu.
4. Push R/S to highlight Imager Info.