Http www flysky cn com
DR
ࣂംಿܑࣂ༡ߖࠝᄢလݤઌᅞལ״ఴ༾۞ନᎈሞ؏ݧݡ᎘مဠݨ٣
ᐗ༗ୢ༤مဠݨ٣ᐗᇴำઌߺଙሞݧݡᐎݨ٣ନܑޱ
٣ᐗࠝࠈလւᆍዷᄞ๙လւୢઌᅞབྷݨޛ83'2:1',$/
፟ၞڱւܬۨجဿ۞ւዸمܬۨဿ۞(17(5(;,7
67ؙ༘ࠝᄢလݤ˷
٘བྷಿ
'5212))ݕᏔ࿂ؙ༘ማܸૺؙܑ༘ࣂംಃૺූ
བྷޛ፟ࠖၹؙཽ༘࡞ෙޱᐗᐎᄯؙ༘ˁˉˁˁ
ᐗଙလւྞ་ܸૺࣴجଙሞလၖىւઌᅞབྷޛ፟
ህֱުዠււݨުٕ݉6:'352*.(<
ཽ࡞ෙޱᐗᐎܹ
ܑࣂംቫኂࢂؐߖၹଥݙႍᎅྱᐖᏊᄢ٣ᐗݨ௵಼ߊ˨༓ݧઌናຮڝࠝᄢዑޱᄄݧࢺ
EXP፺བྷᅛ٣ᐗު
ᆤྑཫޛෆ፷مቘᄜᐎܹᅞڴȣ
Function Instruction:
Operation method
choose the item by UP DOWN button then adjust the data by the knob then save the
Double output control to get 2 different operation mode and suitable for different operation
requirement. This function can be shut or open by a button in anytime
normally, we set this
data and press ENTER to quit the adjustment if press EXIT it means quit the system
directly without saving the data
Parameter Introduction
function to the key SWD, pls see PROG KEY menu.
EXP: exponential operation setting: this function is used to change the sensitivity of the servo
ST˖steering system
DR: The current status, ON means this function opened, OFF means this function closed.
around the neutral position. It has no effect on the maximum servo travel.
To Next Page
Loading...
