5 .Bat te r y ch arg in g not es
5 01Transmitter charger:
A. Install the battery to transmitter with correct direction, and cover it.
B. Connect the charger to the main connector.
C. Connect the charger to the transmitter
Connector.
D. Cut off the power supply immediately after
Recharge completed.
A. Connect the charger to the main connector.
B. Connect the Rechargeable receiver with battery charger
C. Recharge completed, cut off the power supply immediately.
MODELS FS GT3
4
Http www flysky cn com
If your transmitter, receiver using a nickel-cadmium, nickel-metal hydride rechargeable battery,
you have to well-check before you fly. If lack of electricity, it could happen those phenomenon
like inadequate control or out of control, resulting accident. So please charge immediately when
ഠݨࠂ༯༓ቫݨ༡ഞ᳃ഞยݬଙیދދۀዠࠩᅞหഠჃٳދۀދோދோم
ᐃଙംݠᎄନᎈஙمࣗፃ༁ନݨᄆᄣܙߺڄሬၖྱሞދۀދோمᐃ་ห০་یދ
If you are using a nickel-cadmium, nickel-metal hydride batteries for recharging, please use our
company dedicated charger. If the electrical current is too large and it may lead to temperature
over-heated and cause fire burning accident. Please cut off the power supply immediately after
recharging. Please take out the battery from the transmitter when you are not using it within a
period, it is because the battery may damage the aircraft batteries, thus being exposed.
ഠ༓ቫݨ༡ഞ᳃ഞยދۀઌᅞیދหഠ༓ቫႤಏࣇྲྀݨᏈቫیދෙሼၼیދދః࿁ܹଙം
ݠᎄދۀ႔ߊ࿁࢝ܙߺ๚໑ිৈܾୢሬၖȣیދၞڱหഠ৪་ฐߑދኺȣݕഠڌ་م༓ቫ་หഠ
ދۀܙࠂ᎒฿۞˨ሼၼދۀଙംݠᎄࠂދۀඎྨ˨ܙߺ۫مைȣ
5 02Receiver charger:
ଙیދދۀւࠝᄢᏐຉࠂ˨ج໋ދۀࢅ˷
یދෙٯຉ༪ދପ˷
یދෙیދါٯຉࠂیދପ˷
یދၞڱ˨৪་ދኺฐߑȣ
یދෙٯຉ༪ދପ˷
ଙیދ༯ቫދۀପናیދෙیދପஸ˷
یދၞڱ৪་ދኺฐߑ
To Next Page
Loading...
Need help?
General
