(Pic 21.55)
Display sensors:
Display the type, ID and value of all connected sensors. Receiver can connect 15 sensors
at most.
(Pic 21.56)
Choose sensors:
The main screen can display the value of up
to 4 sensors. This function selects which sensors
to display. Select the main screen slot to attribute
(1 to 4). The currently attributed sensor is
displayed. This function enable users to select
sensors they want to display.
(Pic 21.57)
Speed and distance:
As shown in picture 21.57, if a rotation speed sensor is connected to the receiver, this
function set up the virtual speed and odometers sensors.
Parameter Details:
Speed sensor : Number shows over
one mean that there are sensors connecting
Set rotation length means length of each rotation
Reset odometer 1 means odometer when single use
Reset odometer 2 means the odometer of total use
For your safety, please use this function
543
Digital proportional radio control system
To Next Page
Loading...
