About H1
Overview
The H1 helicopter flight control system, with its built-in floating IMU and
double-layer damping sponge, combined with a new generation of control
and IMU algorithms, makes it easy to experience helicopters.
The H1 flight control system consists of a main controller
(built-in floating IMU, compass and barometer) and a dual-mode GPS
module.
System composition
The main controller is the core module of the flight control system. It uses IMU,
barometer, GPS and compass module to achieve precise attitude control and high-
precision positioning of the aircraft.
Use the H1 Assistant to configure parameters to the main controller, including
installation, flight control, and parameters of other external devices. The LED light
shows the current system status in real time, helping you to better understand the
current status of the flight control.
Component and port description
Flight Control (FC)
The FC has the following features:
1. 1. The FC has 5 PWM outputs, and one receiver input port. The PWM output
port is connected to three swash plate servos , main ESC and tail servo(tail
motor )
2. Built-in IMU and barometer to measure flight attitude and altitude, and with GPS to
achieve aircraft horizontal fixed point, thus achieving flight control.
3. Support multiple receiver ，receiver input supports PPM, S.bus and other
mainstream single-line mode, automatic identification.
4. Use TYPE-C plug, regardless of the positive and negative plug, easy to use.
H1
user manual
To Next Page
Loading...