INSTALL
Overview
Install procedure
Please read this section carefully and follow the procedure below to install and
set up your flight control system to ensure that the system works properly.
1
Ensure that the modules required for installation are complete .
2
Watch instructional video (www.
flywingrc.
com)
：
• Watch the installation demo and module connection video, install the FC
system to the aircraft
and connect it properly.
• Watch the software assistant video, run the assistant , and complete the
parameter settings according to the software guide and embedded
instructions.
3 Check that the motor settings, remote channel settings, and protection
functions are set correctly.
4 Confirm that the individual devices connected to the FC are set correctly.
Take the FW450 as an example, the installation effect is as follows:
H
o
H1
user manual
To Next Page
Loading...
