Website
15
6.13 Mixes
Mixes is enabled for some models that require two channels to act in conjunction with each other.
The Mixing channel function provides 1 steering mixes plus 5 programmable mixes.
Function settings:
In the main interface, press the OK key to enter the function menu. Select the MIXES menu by
pressing the UP/DOWN key, and press the OK key to enter the edit state.
6.14 Mixes - Steering Mixes
This is a special function mixing. The ST MIXING(Steering Mix) provides two types of mixing, that
is, TRACK(track-specific) mixer and 4WS mixer.
The 4WS mixer provides 4 different schemes for front and rear wheels to meet the different
requirement scenarios for different vehicles.
Function settings:
1. In the MIXES menu, select the ST MIXING and press the OK key.
2. Select the item you need to adjust by pressing the UP/DOWN key. Press the OK key to enter
the edit state. Then adjust it by pressing the UP/DOWN. Press return after adjustment.
3. Test the function to confirm that all channel outputs operate normally as expected.
6.15 Mixing-Programming Mixes
The programming mixes function is used to mix the output data of any channel to another
channel in a certain rate, to achieve a desired mixing effect.
Function settings:
1. In the MIXES menu, select a MIX and press the OK key.
2. Select the item you need to adjust by pressing the UP/DOWN key. Press the OK key to enter
the edit state. Then adjust it by pressing the UP/DOWN. Press return after adjustment.
3. Test the function to confirm that all channel outputs operate normally as expected.
To Next Page
Loading...
Need help?
General
