Focusrite Clarett+ 4Pre - Clarett+ 4 Pre Technical Specifications; Performance Specifications

19
CLARETT+ 4PRE TECHNICAL SPECIFICATIONS
Performance Specifications
Where possible, specifications are measured to AES17. Unless stated, all specification measurements
are unweighted.
Configuration
Inputs 18: analogue (8), S/PDIF (2), ADAT (8)
Outputs 8: analogue (4), S/PDIF (2), HP2 (2)
Mixer Fully assignable 26-in/10-out mixer
Custom mixes 10 mono
Maximum custom mix inputs 18 mono
Digital Performance
Supported sample rates 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz & 192 kHz
Microphone Inputs
Frequency Response
20 Hz – 20 kHz, +/-<0.03 dB;
20 Hz – 35 kHz, +/-<0.15 dB
Dynamic Range 118 dB at minimum gain (A-Weighted)
THD+N -110 dB @ -1 dBFS and 20 dB gain
Noise EIN -129 dBu (A-Weighted)
Maximum input level 18 dBu
Gain Range 57 dB
Impedance
AIR off: 6.2K �
AIR on: 2.2K �
Line Inputs 1-4 (Variable Gain)
Frequency Response
20 Hz – 20 kHz, +/-<0.05 dB;
20 Hz – 35 kHz, +/-<0.15 dB
Dynamic Range 118 dB at minimum gain (A-Weighted)
THD+N -100 dB @ -1 dBFS and minimum gain
Maximum input level 26 dBu
Gain Range 57 dB
Impedance 66K �
Line Inputs 5-8 (Fixed Gain)
Frequency Response
20 Hz – 20 kHz, +/-<0.05 dB;
20 Hz – 35 kHz, +/-<0.15 dB
Dynamic Range 118 dB (A-Weighted)
THD+N -100 dB @ -1 dBFS; -105 dB @ -6 dBFS
Maximum input level 18 dBu
Impedance 66K �