Focusrite Clarett+ OctoPre User Manual

8
GETTING STARTED
REGISTERING YOUR CLARETT+ OCTOPRE
If you are having trouble with any of the steps below, please watch our video guide here:
focusrite.com/get-started/ClarettPlus-OctoPre.
1. Go to focusrite.com/register/.
2. If you do not have already have a Focusrite/Novation account, select CREATE AN ACCOUNT and
follow the on-screen instructions.
3. If you do have an account, log in and select
REGISTER A NEW PRODUCT:
4. Select your Clarett+ device from the Product drop-down list and enter the Serial Number of your
device at the bottom of the page. The serial number of your Clarett+ OctoPre can be found on the
underside of the unit. Then click
Set Serial Number.
5. Follow the rest of the on-screen instructions to finish registering your device.
6. When the registration is complete, your Product will appear in your Account under the
My Hardware tab.
7. All your bundled software can be found under the My Software tab in your account.

Focusrite Clarett+ OctoPre Specifications

General

XLR inputs	8
Digital audio optical out	2
Power supply included	Yes
Gain	57 dB
Control type	Buttons, Rotary
Product color	Black, Red
LED indicators	Power, Signal strength
Frequency range	20 - 35000 Hz
Built-in display	No

Weight and Dimensions

Depth	286 mm
Width	482 mm
Height	44.5 mm
Weight	4150 g