Focusrite Scarlett OctoPre Dynamic - Page 8

8
19. WORD CLOCK OUT – a BNC connector carrying the Scarlett OctoPre Dynamic’s word clock
signal; this may be used to synchronise other digital audio equipment forming part of the
recording system. The source of sample clock synchronisation is selected by the SYNC
switch [10].
20. WORD CLOCK IN – a BNC connector for the connection of an external word clock signal;
select by setting SYNC to WORD. Use this input if you have a master reference clock which
provides synchronisation for all the digital audio devices in your studio.
21. AC mains – standard IEC receptacle. The Scarlett OctoPre Dynamic is fitted with a “Universal”
power supply, and will run from any AC mains voltage from 100 to 240 V, at 50 or 60 Hz.