15
Video Resolution: The default setting is 1080P+1080P front and
inside. You can change it to 1080P+720P front and inside
The dash cam will record front and inside.
Photo resolution: The default is set to 2592x1952 5M. You can
change it to: 3456x2448 8M, 3648x2736 10M, 4032x3024 12M.
Rotate: Default set to ON. It controls the inside camera reverse or
not.
Exposure: +3,+2,+1,+0,-3,-2, -1. Default is set to +0.0. It represents
the exposure intensity of the lens.
Parking Guard: off/on. Default is set to OFF.
If you set the parking guard to ON, there are two different situations
after the parking guard is triggered:
① If the camera remains connected to the power source even after
turn off the engine (such as you connect it to the power bank
with USB cable or you have hardwired your M2 dash cam), the
dash cam will continue recording under this situation; if you turn
off the dash cam manually (long press the POWER button) after
parked, the dash cam will automatically power on and start to
record a 30s emergency video when it detects collision and
shakes, it will continue recording after the 30s emergency video
recording (Emergency video will be locked).
② If the dash cam does not connect to any external power, it will
automatically shut off within about 30 seconds after you turn off
To Next Page
Loading...