16
the engine. The dash cam will auto power on and record a 30s
emergency video when it detects collision and shake, then auto
shut off after that. So, we recommend to hard wire your dash
cam if you want to use the Parking monitor function well.
Gravity Sensing: off/ High/ Medium/ Low. Default is set to Low. It is
sensitive enough at the low level. If you set to high level a large
amount of locked videos will be generated to occupy the storage
space of Micro-SD card, the camera will stop recording even auto
power on and off once the Micro-SD card is full, and ask you to
format the Micro-SD card.
LCD Brightness: Default is set to OFF. You can change it to 1
minute/ 3 minute. If you don’t want to the dash cam screen light on
when driving or after parking, but you need to keep the dash cam
recording, you can set it to shut down the screen. If you set it to 1
minute, the screen will shut down within 1 minute if you don’t operate
the dash cam.
Language: 简体中文/English / 日本/ Deutsch ie.
Beep sound: Turn on/off the key sound.
Recording: Turn on/off the microphone. Default is set to ON, if you
don’t want to record the voice, please set it to off.
Motion Detection: off/on. Default is set to OFF. When you turn it on,
dash cam will automatically record when the front camera detects
the movement of object. Three cameras will record at the same time.
To Next Page
Loading...