17
NOTE: If you want to use this function, you need to keep the dash
cam turning on, since the small battery can't support M2 dash cam
working a long time after engine off (less than 5 minutes), so we
recommend to use hard wire kit to install the dash cam or you can
connect it to a power bank after engine off. The motion sensor is
installed in the main camera, so it only triggered when the front
camera detect movement.
The dash cam will record a 20 seconds videos normally if the motion
detection is triggered. If the front camera does not detect the object
moving during the 20 seconds video recording, the dash cam will
stop recording, otherwise the dash cam will continue to record.
Frequency: 50Hz/ 60Hz. Default is set to 50Hz. UK for 50Hz, US for
60Hz.
Date/Time: Press OK button to enter, press UP/DOWN button to
select right YEAR, press OK button to confirm then it will
automatically switch to MONTH setting, repeat the operation to set
the month and day, time.
To Next Page
Loading...