18
Time watermark: Default is set to ON.
Photo Stabilization: Default is set to on. It controls the stabilization
of photo taking.
Way of taking pictures: Default is set to 5s. It controls the photo
taking mode and delay setting. 2s/ 5s/ 10s/ Single shot.
Format: Cancel/ OK. Used to format the MicroSD CARD.
Default setting: Restore factory settings
Red-lamp setting: Default is set to AUTO. It controls the front IR
LED. Please note: the inside 4 LEDs is set to AUTO, this is a fixed
setting, cannot be changed.
ISO: Auto/ 100/ 200/ 400. Adjust the light sensitivity.
Cyclic Record: off/ 1 min / 3 min/ 5 min. Default is set to 3 min.
When you set the loop recording to 3 minutes, each video is recorded
To Next Page
Loading...