6
32GB MicroSD card has been installed and formatted in the dash
cam, you can install the dash cam and connect the power to use
directly, if you use a SD card from other brand, please format it follow
the steps below:
Requirements for card specifications:
Type: MicroSD;
Capacity: 32GB – 128GB is recommended;
Speed Class: C10 or above, U3 is necessary.
If you use a new SD card other brand, the M2 will prompt you to
format it when you insert the SD card the first time. Please follow the
below to format the SD card:
1. Short press the MENU button to enter the Camera Settings.
(Please PRESS OK button to stop recording before that if the dash
cam automatically starts recording when you power it).
2. Press DOWN button scroll down the menu until you see the
"Format" option.
3. Press the OK button, then press DOWN button and the OK button
again to select Confirm.
To Next Page
Loading...