Follett Performance Plus REF4P - Reversing the Door Swing

Reversing the Door Swing – Optional
Tools needed:
§ #2 Phillips head screwdriver
§ Flat-head screwdriver
§ Awl
§ Gloves
§ Safety glasses
1. Turn power OFF (and, if applicable, disconnect the battery
backup) prior to reversing door swing.
2. Remove kick panel* and disconnect reed switch where
applicable (Fig. 6).
* If the unit has a keypad lock, the door must be open to remove the kick panel.
Fig. 6
3. Find the control module on the left-hand side of the unit, just to
the left of the condenser.
4. Remove the thumb nut (Fig. 7.1) on the bottom front of the
control module (Fig.7.2).
Fig. 7
5. Pull control module forward 1 inch, rotate left as per Fig. 8, and
continue to pull the control module forward.
Fig. 8
1
2
1
2
REF4P, REF5P and REF5BBP-T Undercounter Refrigerators 7
HEALTHCARE
TM