Follett REF2 Installation Guide

Specications
Dimensions
REF1 REF2
Dimensions (external)
18.6" W x 24" D x 17.93" H
(47 cm x 61 cm x 46 cm)
18.6" W x 24" D x 27.93" H
(47 cm x 61 cm x 71 cm)
Dimensions (internal)
14.5" W x 10" D x 11.25" H
(37 cm x 26 cm x 28.6 cm)
14.5" W x 10" D x 21.25" H
(37 cm x 26 cm x 54 cm)
Shelf Size
13.75 W x 9 D
(35 cm x 23 cm)
13.75 W x 9 D
(35 cm x 23 cm)
Capacity 1 cu ft (28 L) 1.8 cu ft (51 L)
Weight (uncrated)* 73 lbs (33 kg) 87 lbs (39 kg)
* Add 22 lbs/10 kg for packaging.
Electrical Specications
§ 115 V, 60 Hz, 1 phase
§ Full load: 1.8A
§ Minimum circuit ampacity: 15A
§ Connect to dedicated circuit, fuse or breaker
§ Maximum size of branch circuit overcurrent device: 15A
§ Follett recommends circuit be protected by GFCI.
Refrigeration Specications
Refrigerant Charge Size (oz)
Maximum Design Pressures (psi)
High Side Low Side
R134A 3.4 240 88
Heat Rejection
§ 190 BTU/hr (56 W) maximum
Ambient Information
CAUTION!
The REF1 and REF2 are for indoor use only.
Optimum Maximum
Air Temperature ≤80 F (27 C) 100 F (38 C)
Relative Humidity 60% max
Installation
Locating the Refrigerator
Performance of REF1 and REF2 is affected by ambient temperature and location. To ensure proper
performance, please refer to the following drawings and conrm that the clearance requirements are met. There
is no clearance requirement for the back of the refrigerator so it can be placed against the wall.
80 F (27 C) and 60% RH – located under overhanging cabinet or shelf with zero top clearance
Requires 6" (15.3 cm) clearance on either right or left side
2 REF1/REF2 Compact Refrigerators
HEALTHCARE
TM

Follett REF2 Specifications

General

Brand	Follett
Model	REF2
Category	Refrigerator
Language	English