Manual # 26-0302000-00 / Revision E ImagePRO – Multi Format Image Processor
71
ICLIST
Description: Lists the names of all saved Input configurations.
Parameters: None
Returns: List the names of saved Input configurations, one name per line.
Example: ICLIST (Lists all saved Input configurations.)
Command:
ICDEL filename
Description: Delete saved Input configuration.
Parameters: filename – name of configuration to be deleted (not case sensitive).
Example: ICDEL file1 (Deletes Input configuration stored as FILE1.)
Command:
ICREC in filename
Description: Recalls saved Input Configuration.
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
filename – configuration that is being recalled (not case sensitive).
Example: ICREC 3 file1 (Recalls Input configuration stored as file1 for channel 3.)
Command:
ICRST in
Description: Reset Input Configuration for the specified channel.
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
Example: ICRST 1 (Resets Input Configuration for channel 1)
Command:
ICSAV in filename
Description: Saves Input configuration to non-volatile memory.
Parameters: filename – name given to configuration when it is stored. This filename is translated to all upper
case characters. If same input configuration name exist, it will be overwritten.
in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
Example: ICSAV 3 file1 (saves Input configuration as FILE1 for channel 3.)
Command:
ICUSE in
Description: Query the name of the Input configuration used for the specified channel.
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
Returns: Name of the Input configuration used (if any)
Example: ICUSE 1 (Lists the name of the saved Input configurations used by channel 1.)
Command:
ICSP in mode
Description: Sets Input Colorspace for the selected input channel. SMPTE, BETA, and M-II colorspace available
only if input type is YPbPr
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
mode - [0-3] RGB | SMPTE | BETA | M-II
Query:
ICSP? in
Returns the Input Colorspace for the specified input channel in the format
To Next Page
Loading...