72 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E
= mode
Example: ICSP 1 2 (Sets YPbPr input colorspace to Beta for channel 1)
ICSP? 2 (Queries channel 2 for Input Colorspace.)
Command:
IEDGE in edge nnnn
Description: Set Input Edge in oversample mode. The minimum and maximum limit is dependent on the input
resolution.
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
edge (L|R|T|B)
nnnn - Input edge: nnnn
if edge=L [Input H Sync-( Input H Sync + (Input H total X 0.25))]
if edge=R [((H Total – H Front Porch))X0.9 -(H total)]
if edge= T [ Vsync – (Vsync +128)]
if edge= B [ (V total –64) – Vtotal)]
Query:
IEDGE? in edge
Returns the Input Edge value in the format
= nnnn
Example: IEDGE 1 R 1024 (Set Input Right Edge to 1024)
IEDGE? 1 L (Queries Input Left Edge value)
Command:
IGM in n
Description: Sets Input Gamma for the selected input channel
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
n - [1.0-3.0] increment 0.1
Query:
IGM? in
Returns the Input Gamma for the specified input channel in the format
= n
Example: IGM 1 2.2 (Set Input gamma value to 2.2 for channel 1)
IGM? 2 (Queries channel 2’s Input gamma value.)
Command:
IHATV in nnnn
Description: Set Input Horizontal Active. The minimum and maximum limit is dependent on the input
resolution.
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
nnnn - Input Horizontal Active: nnnn[(Actual Input H Active * 2/10, minimum of 150) - +(Actual Input
H Active * 6/5, maximum of Input H Total – Input H Sync)]
Query:
IHATV? in
Returns the Input Horizontal Active in the format
= nnnn
Example: IHATV 1 1024 (Set Input Horizontal Active for channel 1 to 1024)
IHATV? 1 (Queries Input Horizontal Active for channel 1)
Command:
IHPOS in nnnn
Description: Set Input Horizontal Position. The minimum and maximum limit is dependent on the input
resolution.
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
To Next Page
Loading...