FOLSOM IP-2003 - Page 88

74 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E
IRBRT? 1 R (Queries input Red Brightness of channel 1.)
Command:
IRCNT in c nnn.n
Description: Adjusts the Input RGB Contrast values.
Parameters: in - Input chnl [1-3]
c - Color [R|G|B]
nnn.n - Contrast value; Range –25% to +25%
Query:
IRCNT? in c
Returns the Input RGB Contrast values of the specified source in the format
= nnn.n
Example: IRCNT 1 B -15 (Adjusts input 1 Blue Contrast to be -15%.)
IRCNT? 1 B (Queries input Blue Contrast of Channel 1.)
Command:
ISAT in nnn
Description: Adjust Input Saturation.
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
nnn - Input Saturation (75 – 125 if input is YPbPr, 0 – 150 otherwise)
Query:
ISAT? in
Returns the Input Saturation in the format
= nnn
Example: ISAT 1 100 (Adjusts Input Saturation of channel 1 to 100)
ISAT? 1 (Queries Input Saturation of channel 1)
Command:
ISMP in n
Description: Adjust Input Sample Mode.
Parameters: in - Input chnl (1-3)
n - Input Sample Mode: n[0-1], Oversample | 1:1
NOTE: Some input’s sample mode can only be oversample, some can
only be 1:1.
Query:
ISMP? in
Returns the Input Sample Mode in the format
= n
Example: ISMP 1 0 (Adjusts Input Sample mode of channel 1 to OverSample)
ISMP? 1 (Queries Input Sample Mode of channel 1)
Command:
ISYNC in mode
Description: Adjusts the Input Sync selection.
Parameters: in - Input chnl [1-3]
mode - Mode [0|1|2|3], Auto|H/V|CSync|SOG
Query:
ISYNC? in
Returns the Input Sync selected for the specified input channel in the format
= mode
Example: ISYNC 1 1 (Sets Scaler to expect H/V sync on input channel 1.)
ISYNC? 1 (Queries Input Sync selected for channel 1)
Command: