FOLSOM IP-2003 - Page 90

76 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E
Example: IVTOTAL? (Queries Input Vertical Total)
Command:
IVREC in
Description: Input Channel View Recall.
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
Example: IVREC 1 (Recalls Input Channel View of channel 1)
Command:
IVSAV in
Description: Input Channel View Save.
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
Example: IVSAV 1 (Saves the Input Channel View for channel 1)
Command:
LCK? in
Description: Queries Lock Status for specified input channel.
Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD units
Returns: n - Lock Status (0 – 3) Not Locked | Locked (Match Format) | Locked (Best Guessed) | Locked
(using saved Input Configuration)
Example: LCK? 1 (Queries Lock status for channel 1)
Command:
RTE in
Description: Selects and routes input to be processed. Chnl 4 is only available on ImagePRO-SDI
and ImagePRO-HD.
Parameters: in - Input [1-5] 1,2,3, 4=SDI, 5=Black or Logo
Query:
RTE?
Returns the input channel that is routed in the format
= in
Example: RTE 2 (Selects input 2 for processing.)
Example: RTE? (Queries the input channel that is routed.)