FOLSOM IP-2003 - Page 99

Manual # 26-0302000-00 / Revision E ImagePRO – Multi Format Image Processor
85
Command:
EFVATV nnnn
Description: Set custom format’s Vertical Active value.
Parameters: nnnn - V Active [400 - +( V Total - V Sync - V Front Porch)]
Query:
EFVATV?
Returns the custom format’s Vertical Active value in the format
= nnnn
Example: EFVATV 768 (Set custom format V Active as 768)
EFVATV? (Query the custom format’s V Active value)
Command:
EFVFP nn
Description: Set custom format’s Vertical Front Porch value.
Parameters: nn - V Front Porch [1 - +( V Total - V Active - V Sync - 1)]
Query:
EFVFP?
Returns the custom format’s Vertical Front Porch value in the format
= nn
Example: EFVFP 5 (Set custom format V Front Porch as 5)
EFVFP? (Query the custom format’s V Front Porch value)
Command:
EFVSYNC nn
Description: Set custom format’s Vertical Sync value.
Parameters: nn - V Sync [1 - +( V Total - V Active - V Front Porch - 1)]
Query:
EFVSYNC?
Returns the custom format’s Vertical Sync value in the format
= nn
Example: EFVSYNC 2 (Set custom format V Sync as 2)
EFVSYNC? (Query the custom format’s V Sync value)
Command:
EFVRATE nnn.n
Description: Set custom format’s Vertical Rate value.
Parameters: nnn.nn - V Rate [20.00 – 120.00]
Query:
EFVRATE?
Returns the custom format’s Vertical Rate value in the format
= nnn.n
Example: EFVRATE 59.94 (Set custom format V Rate as 59.94)
EFVRATE? (Query the custom format’s V Rate value)
Command:
EFSAV filename
Description: Saves currently defined custom format to non-volatile memory.
Parameters: filename – name given to custom format when it is stored. This filename is translated to all upper
case characters. If same custom format name exist, it will be overwritten.
Example: EFSAV format1 (saves custom format as FORMAT1.)
Command: