FOLSOM IP-2003 - Uploading Files to ImagePRO Unit

84 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E
Command:
EFHATV nnnn
Description: Set custom format’s Horizontal Active value.
Parameters: nnnn - H Active [500 - +(H Total - H Sync - H Front Porch)]
Query:
EFHATV?
Returns the custom format’s Horizontal Active value in the format
= nnnn
Example: EFHATV 1024 (Set custom format H Active as 1024)
EFHATV? (Query the custom format’s H Active value)
Command:
EFHFP nn
Description: Set custom format’s Horizontal Front Porch value.
Parameters: nn - H Front Porch [4 - +( H Total - H Active - H Sync - 4)]
Query:
EFHFP?
Returns the custom format’s Horizontal Front Porch value in the format
= nn
Example: EFHFP 5 (Set custom format H Front Porch as 5)
EFHFP? (Query the custom format’s H Front Porch value)
Command:
EFHSYNC nn
Description: Set custom format’s Horizontal Sync value.
Parameters: nn - H Sync [4 - +( H Total - H Active - H Front Porch - 4)]
Query:
EFHSYNC?
Returns the custom format’s Horizontal Sync value in the format
= nn
Example: EFHSYNC 5 (Set custom format H Sync as 5)
EFHSYNC? (Query the custom format’s H Sync value)
Command:
EFHRATE?
Description: Query custom format’s Horizontal Rate value (kHz).
Parameters: None
Returns: nn.nn - H Rate
Example: EFHRATE? (Query custom format’s H Rate value)
Command:
EFVTOTAL nnnn
Description: Set custom format’s Vertical Total value.
Parameters: nnnn - V Total [480 - 4096]
Query:
EFVTOTAL?
Returns the custom format’s Vertical Total value in the format
= nnnn
Example: EFVTOTAL 512 (Set custom format V Total as 512)
EFVTOTAL? (Query the custom format’s V Total value)