Manual # 26-0302000-00 / Revision E ImagePRO – Multi Format Image Processor
83
Edit Custom Format Remote Commands
Command:
EFLIST
Description: Lists the names of all saved custom formats.
Parameters: None
Returns: List the names of saved custom formats, one name per line.
Example: EFLIST (Lists all saved custom formats.)
Command:
EFRES nn
Description: Set base resolution for custom formats. All parameters for custom format will be loaded using the
specified resolution.
Parameters: nn - Resolution (use RESH command for resolution list)
Query:
EFRES?
Returns the base resolution used for custom formats settings in the format
= nn
Example: EFRES 1 (Load custom format settings with resolution index 1 values)
EFRES? (Query the base resolution for custom format settings)
Command:
EFRESH
Description: Query the available resolution list for custom format.
Parameters: None
Returns: All available resolutions in the following format:
n : HxV @F (example: 18 : 1024x768 @59.94)
Example: EFRESH (Query all available resolutions)
Command:
EFINT mode
Description: Set custom format to be non-interlaced or interlaced format.
Parameters: mode - [0 | 1] Non-Interlaced | Interlaced
Query:
EFINT?
Returns the interlace mode of the custom format in the format
= mode
Example: EFINT 1 (Set custom format to be interlaced)
EFINT? (Query the interlace mode for the custom format)
Command:
EFHTOTAL nnnn
Description: Set custom format’s Horizontal Total value.
Parameters: nnnn - H Total [640 - +(162000 / H Rate)]
Query:
EFHTOTAL?
Returns the custom format’s Horizontal Total value in the format
= nnnn
Example: EFHTOTAL 1344 (Set custom format H Total as 1344)
EFHTOTAL? (Query the custom format’s H Total value)
To Next Page
Loading...