82 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E
of 150) - +(Actual Output V Active *6/5, with absolute maximum value of Output V Total – Output V
Sync)]
Query:
OVATV?
Returns the Output Vertical Active value in the format
= nnnn
Example: OVATV 768 (Set Output Vertical Active to 768)
OVATV? (Queries Output Vertical Active)
Command:
OVPOS nnnn
Description: Set Output Vertical Position. The minimum and maximum limit is dependent on the output
resolution.
Parameters: nnnn - Output Vertical Position: nnnn[ (Output V Sync) - +(Output V Active)]
Query:
OVPOS?
Returns the Output Vertical Position value in the format
= nnnn
Example: OVPOS 35 (Set Output Vertical Position to 35)
OVPOS? (Queries Output Vertical Position)
Command:
OVSYNC nnnn
Description: Set Output Vertical Sync Width. The minimum limit is 2 and maximum limit is dependent on the
output resolution.
Parameters: nnnn - Output Vertical Sync Width: nnnn[2-(Output V Total -Output V Active – Output Vertical Front
Porch –2)]
Query:
OVSYNC?
Returns the Output Vertical Sync Width value in the format
= nnnn
Example: OVSYNC 6 (Set Output Vertical Sync Width to 6)
OVSYNC? (Queries Output Vertical Sync Width)
Command:
OVTOTAL nnnn
Description: Set Output Vertical Active. The minimum and maximum limit is dependent on the output
resolution.
Parameters: nnnn - Output Vertical Total: nnnn[ (Output Vsync + Output Vactive + (Output Vpos – Output
Vsync)) - +(Actual Output V Total * 9/5)]
Query:
OVTOTAL?
Returns the Output Vertical Total value in the format
= nnnn
Example: OVTOTAL 806 (Set Output Vertical Total to 806)
OVTOTAL? (Queries Output Vertical Total)
To Next Page
Loading...