FOLSOM IP-2003 - Software Upgrade Instructions

Manual # 26-0302000-00 / Revision E ImagePRO – Multi Format Image Processor
81
OSHRP? (Queries Output Sharpness)
Command:
OSOG n
Description: Output Sync On Green mode.
Parameters: n - Output SOG: n[0-2] Off | Standard | Tri-level
Query:
OSOG?
Returns the Output Sync On Green mode in the format
= n
Example: OSOG 0 (Turns off Output Sync On Green mode)
OSOG? (Queries Output Sync On Green mode)
Command:
OSYNC n
Description: Set Output Sync type.
Parameters: n - Output Sync: n[0-4], Csync| +H+V | +H-V | -H+V | -H-V
Query:
OSYNC?
Returns the Output Sync type in the format
= n
Example: OSYNC 0 (Set Output Sync type to Csync)
OSYNC? (Queries Output Sync type)
Command:
OUSCN nn
Description: Set Output Underscan.
Parameters: nn - Output Underscan: nn[0% - 15%]
Query:
OUSCN?
Returns the Output Underscan value in the format
= nn
Example: OUSCN 10 (Set Output Underscan to 10%)
OUSCN? (Queries Output Underscan)
Command:
OTPM type rast
Description: Sets Internal Test pattern mode and raster box mode.
Parameters: type - Test Pattern type: type[0..10] 0=Off, 1=H Ramp, 2=V Ramp, 3=100% Col Bars, 4=75% Col
bars,5=16x16 Grid, 6=32x32 Grid, 7=Burst, 8=50% Gray, 9=Gray Steps 1, 10=Gray Steps 2
rast - Raster Box: rast[0-1] On | Off
Query:
OTPM?
Returns the Test pattern mode and raster box mode in the format
= type rast
Example: OTPM 9 0 (Selects Gray Steps 1 test pattern with raster off)
OTPM? (Query test pattern mode and with raster box mode)
Command:
OVATV nnnn
Description: Set Output Vertical Active. The minimum and maximum limit is dependent on the output resolution.
Parameters: nnnn - Output Vertical Active: nnnn[ (Actual Output V Active * 2/10, with absolute minimum value