FOLSOM IP-2003 - Page 94

80 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E
Command:
OHUE nnn
Description: Adjust Output Hue. Only applicable if output is NTSC. n/a if PAL
Parameters: nnn - Output Hue (-22.0 - +22.0)
Query:
OHUE?
Returns the Output Hue value in the format
= nnn
Example: OHUE 20 (Adjust Output Hue to 20)
OHUE? (Queries Output Hue)
Command:
OPDL mode
Description: Adjust Output Pedestal mode. Only applicable if output is NTSC. n/a if PAL
Parameters: mode - Disable/Enable pedestal mode (0 / 1)
Query:
OPDL?
Returns the Output Pedestal mode in the format
= mode
Example: OPDL 0 (Disable Output Pedestal mode)
OPDL? (Queries Output Pedestal mode)
Command:
OSAT nnn.n
Description: Adjust Output Saturation. Only applicable if output is NTSC/PAL
Parameters: nnn.n - Output Saturation (-75.0 - +125.0)
Query:
OSAT?
Returns the Output Saturation value in the format
= nnn.n
Example: OSAT 100 (Adjust Output Saturation to 100)
OSAT? (Queries Output Saturation)
Command:
OSER mode
Description: Output Serrations mode
Parameters: mode - Disable/Enable serrations mode (0 / 1)
Query:
OSER?
Returns the Output Serrations mode in the format
= mode
Example: OSER 0 (Disable Output Serrations mode)
Example: OSER? (Queries Output Serrations mode)
Command:
OSHRP nnn
Description: Set Output Sharpness
Parameters: nnn - Sharpness: nnn[-10 - +10]
Query:
OSHRP?
Returns the Output Sharpness value in the format
= nnn
Example: OSHRP 10 (Set Output Sharpness value to 10)