Authorization and information management for the
corresponding protocol of the controller.
DHCP: DHCP ON means network-related IP address
can be attained automatically (dynamic address), DHCP
OFF means network-related IP address need to be
added manually (static address);
Extra IP 1/2/3: You can manually add the IP of other
network segments, and after enabling it, it can be used
to control cameras in other different networksegments in
the LAN (should be used when DHCP is off).
F1/F2:You can customizethe functionsof the buttonsF1
and F2.
a.
Switch page: Switch the display mode of the current
camera’sstatus , the modes include "PTZ", "Exposure" and
"White Balance";
b.
Custom command: Power: Control camera standby/
startup (long press for 2 seconds to take effect); Digital
zoom: Turn on/off the digital zoom function of the
camera;
(The above two functions only take effect under the
VISCA and VISCA Over IP protocols).
Presetoperationmode: optionalbutton to select thepreset
position as 10 or 255 mode;
Relatively speaking, the preset position 10 mode is
faster than thepreset position 255mode, but thepreset
position 255 mode can call more preset positions than the
preset position 10 mode;
For detailed operation methods please turn to the
"Setting, Calling, and Deleting Presets" item for
reference.
To Next Page
Loading...