Fora D40d - Control Solution Testing; Performing a Control Solution Test

20
Control Solution Testing
FORA Control Solution contains a known amount of glucose that reacts
with test strips and is used to ensure your meter and test strips are
working together correctly.
Do a control solution test when:
●
you first receive the meter,
●
at least once a week to routinely check the meter and test strips,
●
you begin using a new vial of test strips,
●
you suspect the meter or test strips are not working properly,
●
your blood glucose test results are not consistent with how you feel, or
if you think the results are not accurate,
●
testing process or
●
you have dropped or think you may have damaged the meter.
Performing a Control Solution Test
1. Insert the test strip to turn on the
meter
Insert the test strip into the meter. Wait
for the meter to display “ ” and “ ”.
2. Press to mark this test as a
control solution test