26
5. Read your result
The result of your blood glucose test
will appear after the meter counts
down to 0. This blood glucose result will
automatically be stored in the memory.
WARNING:
• The used lancet and test strip may be potentially biohazardous. Please discard
them carefully.
• Wash your hands thoroughly with soap and water after handling the meter,
lancing device and test strips to avoid contamination. For more information,
please refer to the “Cleaning and Disinfection” section.
6. Eject the used test strip and remove
the lancet
To eject the test strip, point the strip at a
disposal container for sharp objects. The
meter will switch itself off automatically
after the test strip is ejected.
Always follow the instructions in the
lancing device insert when removing
the lancet.
To Next Page
Loading...
