47
Important Control Solution Information
●
Use only FORA control solutions with your monitor.
●
Do not use the control solution beyond the expiration date or 3 months
after first opening. Write the opening date on the control solution vial
and discard the remaining solution after 3 months.
●
It is recommended that the control solution test should be done at
room temperature (68ºF - 77ºF/20ºC - 25ºC). Make sure your control
solution, monitor, and test strips are at this specified temperature
range before testing.
●
Shake the vial before use, discard the first drop of control solution,
and wipe off the dispenser tip to ensure a pure sample and an
accurate result.
●
Store the control solution tightly closed at temperatures between 36ºF
and 86ºF (2ºC to 30ºC). Do NOT freeze.
Caring for Your Pressure Cuff
●
To clean the cuff, wipe it with a soft, moistened cloth and soap.
●
Do not wash the cuff.
●
Do not immerse the cuff in water or other liquids.
●
Do not use petrol, thinners or similar solvents to clean the cuff.
Calibration and Service
The accuracy of this blood pressure monitor has been carefully tested
and is designed for a long service life. It does not require calibration.
Please consult your local authorized FORA distributor or dealer for any
question.
To Next Page
Loading...
