16
Meter Storage
Storage conditions: -4°F to 140°F (-2°C to
6°C), below 95% relative humidity.
Always store or transport the meter in its
original storage case.
Avoid dropping and heavy impact.
Avoid direct sunlight and high humidity.
Important Test Strip Information
Storage conditions: 35.6숳 to 89.6숳 (2삸 to 32삸),
below 85% relative humidity. Do not freeze.
Store your test strips in their original vial only.
Do not transfer to another container.
Store test strip packages in a cool dry place.
Keep away from direct sunlight and heat.
After removing a test strip from the vial,
immediately close the vial cap tightly.
Touch the test strip with clean and dry hands.
Use each test strip immediately after removing
it from the vial.
Write the opening date on the vial label when you
fi rst open it. Discard remaining test strips after 3
months (90 days).
Do not use test strips beyond the expiration date.
This may cause inaccurate results.
Do not bend, cut, or alter a test strip in any way.
Keep the strip vial away from children. The cap
and the test strip may be a choking hazard. If
swallowed, promptly seek medical attention.
For further information, please refer to the test
strip package insert.
Important Control Solution Information
Use only FORA control solutions with your
meter.
• Do not use the control solution beyond the
expiration date or 3 months after fi rst opening.
Write the opening date on the control solution
vial and discard the remaining solution after 3
months.
It is recommended that the control solution test
be done at room temperature (68°F to 77°F) 20°C
to 25°C. Make sure your control solution, meter,
and test strips are at this specifi ed temperature
range before testing.
Store the control solution tightly closed at
temperatures between 36°F and 86°F (2°C and
30°C). DO NOT FREEZE.
To Next Page
Loading...
