Fora GD40 - Setup and Modes; Setting the Meter

12
Before using your meter for the first time or if you change the meter
battery, you should check and update these settings. Make sure you
complete the steps below and have your desired settings saved.
► Entering the Setting Mode
Start with the meter off (no test strip
inserted). Press SET button to turn on the
meter.
Step 1
Setting the date
With the year flashing, press
button
until the correct year appears. Press SET
button.
With the month flashing, press
button
until the correct month appears. Press
SET button.
With the day flashing, press
button
until the correct day appears. Press SET
button.
Setting the Meter