Force F100 GHOST User Manual

FORCE1 RC
10
QUICK START GUIDE
FIGURE 8
FIGURE 7
Press the red button on top left of
the transmitter while turning on the
power (Fig. 6). The green light on the
transmitter will start ashing.
NOTE:
If the quick start guidelines do not work, or if the drone is not
performing properly, please follow the calibration steps on page 11.
FIGURE 6
Insert the battery into the drone to power it on (Fig. 7). You will hear a long
beep and the green light on the transmitter will stop blinking.
Unlock the drone by pushing the left stick to
the bottom position while pressing the top
left red button (Fig. 8). The propellers will
start spinning.
The drone is ready to y. See the Preight
Checklist and Basic Flight Controls before
operating.
1
2
3
4

Force F100 GHOST Specifications

General

Brand	Force
Model	F100 GHOST
Category	Drones
Language	English