TOP VIEW
CAB
3
10/19
INSTALLATION
LOOSEN AND REMOVE CAB END BED BOLTS
Loosen and remove the cab end bed bolts using a ratchet with an EP-24 torx socket.
Loosen per manufacture specs. If your truck bed is equipped with a spray in bed liner
you will need to cut around the head of each bolt with a utility knife to help break the
bed bolts free.
Discard the bed bolts.
Removal of all 4 bed bolts will DO NOT REMOVE ALL 4 BED BOLTS AT ONCE!
allow the bed to move out of alignment. This will make it difficult to
re-install the bed bolts.
UTILITY KNIFE
BEDSLIDE.COM | 888.807.0099
EP-24 TORX SOCKET
EP-24
CAB
To Next Page
Loading...
