BEDSLIDE.COM | 888.807.0099
8/19
10
INSTALL D-RING TIE DOWNS
Locate the (4) D-ring tie downs inside the install kit. Thread into the MOUNT BLOCKS you
previously inserted into the BEDTRAX, position at desired location and tighten down.
Lastly re-install the (2) plastic end caps and tighten the set screws with a 1/8 allen key.
THAT’S IT! YOUR BEDSLIDE® IS FULLY ASSEMBLED!
GUARDRAIL ASSEMBLY (8’ APPLICATIONS ONLY)
1/8 ALLEN KEY
TIGHTEN TO MANUFACTURE SPECS, 15 INCH LBS.
To Next Page
Loading...
