11
15/19
BEDSLIDE.COM | 888.807.0099
INSTALLATION
RE-INSTALL SLIDING TOP FRAME
Re-install the BEDSLIDE® top frame into the base by placing top frame over the rear bearings
and sliding the frame forward to the stowed position. This step will require 2 people to help lift!
TEAM LIFT
REQUIRED
slide
SIDE VIEW
9
10
14/19
BEDSLIDE.COM | 888.807.0099
INSTALLATION
ATTACH REAR MOUNTING BRACKETS
Attach LEFT and RIGHT mounting brackets to the threaded studs affixed to each side of the
base frame. Secure each bracket with two 3/8-18 serrated flange nuts & tighten with a
9/16” wrench.
TIGHTEN TO 21 FT. LBS.
½
½
9/16” WRENCH
SECURE REAR MOUNTING BRACKETS TO THE BED
Apply a small bead of Loctite® 242 to the threads of the new factory bed bolts and secure both
the LEFT and RIGHT mounting brackets directly to the bed.
TIGHTEN ALL FOUR FACTORY BED BOLTS TO 129 FT. LBS. TO SECURE THE BEDSLIDE® IN PLACE.
EP-24 TORX SOCKET
EP-24
x4
3/8-18 HEX NUT
TORQUE WRENCH
TORQUE WRENCH
To Next Page
Loading...
