Ford BEDSLIDE User Manual

BEDSLIDE.COM | 888.807.0099
2/19
1
GRAB BAR ASSEMBLY (8’ APPLICATIONS ONLY)
ATTACH BAR HANDLE (APPLIES TO 8’ MODEL ONLY)
Attach bar handle to the front of the frame by using the pre-installed 3/8-16 x 1 ½”
socket cap bolts located on the front faceplate. Tighten each socket cap bolt using a
5/16 allen key. PLEASE NOTE: The bar handle is located underneath the decks between
the frame.
5/16 ALLEN KEY

Ford BEDSLIDE Specifications

General

Brand	Ford
Model	BEDSLIDE
Category	Automobile Accessories
Language	English