4. To return the seat to the seating
position, grasp the grip and pull
the seatback upwards and then
rearwards.
5. Fold the seat cushion back.
Creating a level load floor
CAUTION
When transporting a load with
the seats folded flat, always fold
the relevant carpeted cover forwards
to cover the folded seats.
1. Turn the retainers on the rear of
the third row seatbacks
anticlockwise through 90 degrees
to release the carpeted cover.
2. Fold it forwards to cover up the
folded seats.
3. To fix the cover back onto the
seatbacks, fold it back and push
the retainers into the seatback
until they click into place.
Note:
When only the third row seats
are folded flat, fold the covers
forwards to cover up the base of the
second row seats. The smaller flaps
at the front of the cover should stand
vertically against the second row
seatbacks.
HEATED SEATS
CAUTION
Operating the heated seats with
the engine off will drain the
battery.
135
Seats
To Next Page
Loading...
