Adjust the ventilated seats using the
switches on the centre console.
Press the + button repeatedly to raise
the temperature or the – button
repeatedly to lower the temperature.
The number of illuminated lights
beside the button indicates the
selected step. The heating setting is
indicated in red, the cooler setting in
blue.
When no light is illuminated, the
ventilation is switched off.
Note:
The settings are stored when
the ignition is switched off.
Note:
When the seat is being
ventilated, the heater may switch on
automatically. This is to prevent the
flow of air becoming uncomfortably
cool.
Note:
The air in the vehicle interior
is used to ventilate the seats. The
cooling effect therefore depends on
the temperature of the vehicle
interior. Switch on the air conditioning
if necessary and set the air
distribution to footwell. See Climate
control (page 113).
FRONT SEAT ARMREST
To Next Page
Loading...
