5. Latch the hooks on the retention
net belts to the luggage anchor
points 3. See Luggage anchor
points (page 185).
6.
Tighten the belts 4.
Remove in the reverse order.
If you need to use the centre seat
belt:
1.
Open the flap 5.
2. Route the seat belt through the
opening.
LUGGAGE COVERS
Pull out the roller cover and secure it
in the retaining points.
Release it from the retaining points
and let it roll back into the case. Clip
the retaining hook onto the case.
To remove or install the cover, push
either end of the case inwards.
192
Load carrying
To Next Page
Loading...
