Note:
You can disable this feature
by leaving the electric exterior mirror
selector switch in position B.
The exterior mirrors will return to the
original position:
•
If the vehicle speed exceeds 10
km/h (6 mph).
•
Approximately 10 seconds after
reverse gear has been
disengaged.
•
If the electric exterior mirror
selector switch is returned to
position B.
Passive setting
1. Turn the ignition on. Do not start
the engine.
2. Select the desired exterior mirror
(A or C).
3. Select reverse gear, the selected
exterior mirror will adjust to a
preset position.
4. Adjust the mirrors to the required
dipped position. See Electric
exterior mirrors (page 79).
5. Disengage reverse gear.
The settings will be stored
automatically.
Active setting
1. Turn the ignition on. Do not start
the engine.
2. Select the desired exterior mirror
(A or C).
3. Select reverse gear, the selected
exterior mirror will adjust to a
preset position.
4. Adjust the mirror to the required
dipped position. See Electric
exterior mirrors (page 79).
5. Press and hold the desired
pre-set button until a single chime
sounds to confirm. See Memory
function (page 144).
INTERIOR MIRROR
The auto-dimming mirror will adjust
automatically when hit by glaring light
from behind. It will not work when you
have selected reverse gear.
81
Windows and mirrors